PLC Copper Radiator Fin Forming Machine
Condition:New
Fin Material:Copper
Speed:100 M/min
Working Principle:Fin Rolling Mechanism
Core builder machines include condenser core-making machines, intercooler core-making machines, heater aluminum core-assembling machines, water tank core-making machines, and aluminum radiator core-assembling machines. A core assembly machine is used to assemble cores based on a combined control of a mechanical and pneumatic mechanism, the electrical control system of PLC, and a touch screen. It can adapt to different sizes of magnetic cores and be applied to other types of tubes.
The fin-forming machine is controlled by a PLC, AC servo system, and touch screen. It forms aluminum radiator fins for fin and tube heat exchangers, including aluminum radiator fins, inter-cooler turbulence fins, condenser fins, and evaporator fins in automobile air conditioners.
The radiator plastic tank crimping machine connects the plastic water chamber and the radiator core closely through the air cylinder drive to ensure that the coolant circulates in the radiator. This is the last process to complete the radiator manufacturing.
The most commonly used features of the semi-automatic crimping machine are its low price, simple operation, suitability for the production situation of many models, and small quantity.
Features of the automatic crimping machine: It does not need to be pressed by hand, and the tab can be pressed simultaneously on the four sides of the core. It has high production efficiency and high speed. It is suitable for a single model’s production mode and quantifying city productivity.
Aluminum Brazing Furnace: it is used for brazing of air conditioners, oil coolers, radiators, air conditioner evaporators, condensers, radar network antennas, waveguides, and various plate-warped or tube-fin heat exchangers for automotive environmental protection products.
Disclaimer: We promise not to automatically push advertising emails for you.
Condition:New
Fin Material:Copper
Speed:100 M/min
Working Principle:Fin Rolling Mechanism
Condition:New
Workpiece specification:as per drawing’s requirement
Workpiece length:100-1000mm
Production capacity:180 pcs/hour
Drive mode:Servo+Hydraulic+Pneumatic
Height Of Brazing Furnace:250mm
Width Of Brazing Furnace:1000mm
Mesh Belt Operating Surface Height:900mm
Length Of Brazing Furnace:6000mm
Working Station Size:1000mm×250mm
Speed:150～600mm/min
Condition:New
Fin Making Machine :280m/min
coil inner diameter:300mm
Fin cutting frequency: max 80 times/min;
Pipe effective length: 200-650mm
Slot forming time: 20 seconds per pipe
Hydraulic system working pressure: 8-21Mpa
pneumatic system working pressure: 0.5-0.8Mpa
overall dimension: 2500mm×2100mm×2750mm
Core Components:PLC, Motor
Condition:New
Height Tolerance:+0.03mm, – 0.01mm
Fin Width:8~200mm (Customized)
Core Components:PLC, Motor
Condition:New
Height Tolerance:+0.03mm, – 0.01mm
Fin Width:8~200mm (Customized)
Core Height:350-780mm (Customized)
Core Thickness:16~48mm (Customized)
Clearance Between Fin & Header Plates:2mm (1.0mm)
Built Core Width Error:±1.5mm
Machine Weight:About 2100kg
Radiator Core Height:100-800mm
Suitable Teeth Pitch:Adjustable, Default 10mm
Clinching Speed:1-20 Times Per Minute
Working speed:0-100m/min stepless control
Fin height: 8±0.05mm
Voltage, Power:380V/50Hz,4.5kw
Protective Shield:Can Be Customized
Programmable:Yes
Conditions:NEW
Fin & Tube Collocating Time:1 Second Per Collocation
Voltage, Power:380V 50Hz ≤13Kw
Applicable Core:Radiator Core, Condenser Core