Product Name： Pressure-Sensitive Adhesive (PSA) Remover
Scope of application: removal of pressure-sensitive adhesive residues on various material surfaces.
Equipment used: ultrasonic or immersion cleaning equipment.
Instructions: Dilute with water to 3–5% to prepare the working solution, then clean by ultrasonic or immersion.
Product Parameters
| NO | Parameters | Specifications |
| 1 | Appearance | Colorless, odorless, transparent liquid |
| 2 | pH | Around 5.8 |
| 3 | Cleaning Power (≥90) | 120 |
| 4 | Physical Stability | Stable |
| 5 | Density (g/ml) | 1.06 |
| 6 | Solid Content | ≥30% |
| 7 | Corrosiveness | Level 0 |
Solving Factory Cleaning Challenges
1. Addressing the challenge of single-process cleaning limitations in industrial settings.
2. Resolving the issue of pressure-sensitive adhesive residues that cannot be thoroughly removed.
3. Eliminating surface grinding marks on components caused by manual sanding operations.
4. Preventing post-cleaning discoloration (yellowing, darkening, or dulling) of treated parts.
Product Advantages
1. Rapid removal, high cleaning efficiency, zero damage to bonded substrates.
2. Free of toxic solvents; non-polluting, skin-safe.
3. Safety-assured, eco-friendly, readily biodegradable for effortless wastewater discharge.
Precautions
1. Keep out of reach of children.
2. Rinse parts thoroughly after treatment; residue may cause staining.
3. Wipe small spills with cloth; contain large spills with inert absorbent (sand/earth).
4. Seal tightly and store away from heat, sparks, and open flame when not in use.
5. In case of skin contact, flush immediately with plenty of water; seek medical attention if irritation persists.
Packaging & Storage
25 kg net plastic drum. Store in a cool, shaded area.
Shelf Life
3 years when sealed and stored properly.
Pressure-Sensitive Adhesive (PSA) Remover
Formulated with imported non-ionic surfactants, organic acids and penetrating agents, this high-performance, energy-saving acidic cleaner is engineered to remove protective-film residues, pressure-sensitive adhesive labels and paint overspray from metals, automotive baked finishes, most rubbers and plastics, coatings, stainless steel, aluminum alloys and decorative substrates—without compromising environmental compliance.
Product SKU: 200
Product Brand: DAG
5
