Description
Machine Description
| Machine Name: | Radiator Making Machine | Speed: | Direct Push-over And Rolling For Wavy Non-teeth Header |
|---|---|---|---|
| Aluminum Tube: | Tube Straightening And Cutting Machine | Straightened And Cut Per Time: | 2 Pipes |
| Flat Aluminum Tube Width: | 14-32mm | Control: | PLC/HMI |
| High Light: | radiator manufacturing equipment, radiator tube-making machine | ||
Harmonica Pipe Straightening & Cutting Machine
- The high-speed equipment is used for straightening and cutting aluminum harmonica tubes of radiators.
- A precision linear guidance rail conveys the raw material. The pipes are cut using a revolving or linear knife.
Machine Technical Parameters
| Production rate | 2.5 seconds per time (based on cut-to-length at 650mm) |
| Pipes are to be straightened and cut per time | Two pipes |
| Flat aluminum tube thickness | 1-3mm |
| Flat aluminum tube width | 14-32mm |
| Cut-to-length | larger than 100mm |
| Feeding length of the aluminum pipe | 200-900mm (twice or multiple charges to cut the aluminum tube when the cut-to-length is very large) |
| Length straightening accuracy <±0.2mm | |
| Width straightening accuracy | ±0.04mm/850nn |
| Thickness straightening accuracy | ±0.02/850mm |
| Replacement time of coils | 3min |
| Preparation time for cutting tubes with different width | ≤15min |
| Cutting knife replacement time | ≤5mins |
| Air source pressure | 0.6Mpa |
| Equipment weight | 2.8T |
| Main Machine dimension | 4500×850×1300mm (the area length is 15m if the decompiler is included.) |
| Decoiler overall dimension | 1400×1300×1800mm ( 2 sets) |
Fully-automatic Uncoiler Machine
- Coil inner diameter: 450-500mm;
- width: 300-330mm;
- decompiler bearing weight: 300kg;
- Decoiler motor power: 0.75kw
Reviews
There are no reviews yet.