Product Name： Speciality Grease & Oil Removal Cleaner
Grease & Oil Removal Cleaner Application：
Engineered for automotive, aerospace, construction, textile and mining sectors; rapidly removes mineral, vegetable and animal oils plus cutting fluids from aluminium alloys without attacking surface finish.
Operating Instructions：
Dilute 3–5 % v/v in DI water (30–50 mL per litre); heat to 65 ± 5 °C; clean by ultrasonic agitation or heated immersion tank for 3–10 min, then warm-water rinse and dry.
Grease & Oil Removal Cleaner Parameters
| NO | Item | Specifications | |
| 1 | Appearance | Pale yellow liquid | |
| 2 | Mixture Ratio | About 3-5% | |
| 3 | pH | Ratio | PH |
| 25% original solution | 12.47 | ||
| 4 | Corrosiveness | Level 0 | |
| 5 | Foaming (≤200) | 130 | |
| 6 | Solid Content | ≥40% | |
| 7 | Density (g/ml) | 1.08 | |
| 8 | Degreasing Time (min) | About 5 minutes | |
| 9 | Degreasing Temperature (°C) | 65±5 | |
| 10 | Surface Tension (mN/m) | 32.2 | |
| 11 | Refractive Index | Ratio | Concentration |
| 25% original solution | -- | ||
| 12 | Detergent Power (≥90) | 120 | |
| 13 | Physical Stability | Stable | |
Grease & Oil Removal Cleaner Key Performance
1. Built-in temporary corrosion and bio-fog inhibitor—up to 72 h indoor ferrous and aluminium protection without secondary coating.
2. Ultra-low 3–5 % dose rate; high soil-loading capacity keeps bath active 2× longer, cutting chemical spend and downtime by 30–40 %.
3. Rapid-splitting micro-emulsion: removes heavy, carbonised oils in a single 3-minute cycle, yet rinses spot-free with ambient water, eliminating secondary wipe or solvent flush.
4. Non-etch, non-staining chemistry: preserves original alloy lustre, mirror finishes and critical tolerances; leaves zero water-mark, streak or rainbow bloom.
5. HSE-compliant, VOC-free, non-toxic, non-irritating; >90 % OECD 301 biodegradable for straightforward wastewater treatment and permit compliance.
Solving Critical Industrial Cleaning Challenges
1. Aluminum pitting prevention: buffered, low-alkalinity formula with aluminum-specific corrosion inhibitors eliminates pitting and etching aluminum alloys—even after 24 h bath exposure.
2. Dead-zone certainty: advanced wetting package reduces surface tension to <28 mN/m, lifting carbonized oil from micro-channels, blind holes and deep-draw ribs in a single pass.
3. Multi-substrate versatility: one cleaner handles aluminium, galvanized steel, magnesium, Inconel and painted parts, cutting cleaner SKUs and inventory cost.
4. Color-lock assurance: neutral pH and chelant-free surfactant system prevent post-clean yellowing, darkening or dulling; parts exit bright and inspection-ready.
5. High-capacity economics: soil-loading up to 8 % maintains >90 % cleaning efficiency, doubling parts-per-bath and reducing chemical consumption 30–50 % while raising throughput.
Safety & Handling Instructions
1. Keep out of reach of children; lock storage area.
2. Eye contact: rinse immediately with plenty of water for 15 min; remove contact lenses if present and easy to do; seek medical advice.
3. If swallowed: rinse mouth, DO NOT induce vomiting; call a POISON CENTER or physician at once.
4. Spill control: absorb small spills with inert cloth; contain large spills with sand or vermiculite before transfer to a labelled waste container.
5. Seal container tightly after each use; store indoors above 5 °C to prevent freezing and maintain formulation stability.
Packaging & Storage
Packaging: 25 kg net in UN-rated, UV-stabilized HDPE drum.
Storage: keep sealed in a cool, dry, well-ventilated area away from direct sunlight and heat.
Shelf Life
3 years when stored unopened in original, factory-sealed container.
Friendly Reminder: Treat spent cleaning solution through on-site wastewater treatment; verify effluent meets local discharge limits before release.
Specialty Grease & Oil Removal Cleaner
This grease & oil removal cleaner is formulated with imported anionic and non-ionic surfactants and built on an advanced international “green-chemistry” platform. This high-efficiency, energy-saving, water-based, mildly alkaline cleaner delivers broad-spectrum oil removal while remaining VOC-free and operator-safe. Designed to replace trichloroethylene, hydrocarbon, modified-alcohol and aggressive acid/alkali chemistries, it cuts energy use 30–50 % and meets REACH, RoHS and EPA Safer Choice standards for sustainable, compliance-driven manufacturing.
Product SKU: 126
Product Brand: DAG
5
