Product Name: Specialized Aluminum Surface Cleaner
Applications: Suitable for cleaning the surfaces of aluminum alloy parts in industries such as automotive parts, aerospace, building materials, textiles, and mining machinery, using processing fluids such as mineral oil, vegetable oil, animal oil, and cutting fluid.
Equipment Used: Ultrasonic equipment, heating equipment
Usage Method: Dilute with water at a ratio of 5% to prepare a working solution, heat to approximately 65±5℃, and clean using ultrasonic waves or heating.
Product Parameters
| NO | Item | Specifications | |
| 1 | Appearance | Milky white liquid, slightly stratified at room temperature (after stirring evenly) | |
| 2 | Mixture Ratio | Approximately 5% | |
| 3 | pH | Ratio | 25% original solution |
| 25% original solution | 12.85 | ||
| 4 | Corrosiveness | Level 0 | |
| 5 | Foaming (≤200) | 130 | |
| 6 | Solid Content | ≥40% | |
| 7 | Density (g/ml) | 1.26 | |
| 8 | Degreasing Time (min) | About 5 minutes | |
| 9 | Degreasing Temperature (°C) | 65±5 | |
| 10 | Surface Tension (mN/m) | 31.8 | |
| 11 | Refractive Index | Ratio | Concentration |
| 25% original solution | -- | ||
| 12 | Detergent Power (≥90) | 120 | |
| 13 | Physical Stability | Stable | |
Product Advantages
1. **Mildew-Resistant Additive** – built-in anti-mold protection during storage and between process steps.
2. **Rapid Oil Splitting & Rinse-Free Finish** – lifts mineral, vegetable, animal and cutting oils in seconds, drains clean without streaks.
3. **Ultra-Low 5 % Dilution** – cut chemical spend up to 95 % versus conventional cleaners.
4. **Zero-Aluminum Attack** – non-etching, preserves original brightness; leaves zero water marks, no rainbow stains.
5. **Green-Safety Certified** – non-toxic, non-sensitizing, readily biodegradable.
Overcome Your Industrial Cleaning Pain Points
1. **Eliminates post-wash pitting** – chloride-free, non-caustic formula prevents pinpoint corrosion on aluminum alloys.
2. **Removes oil from dead-end zones** – ultra-low surface tension penetrates blind holes, crevices and complex geometries in a single pass.
3. **Cuts chemistry consumption 20:1** – 5 % ultra-concentrate delivers high soil loading, longer bath life and 3× more parts per tank.
4. **Locks-in original brightness** – anti-oxidation additive stops yellowing, whitening, darkening or dulling after drying.
Safety Notes
1. Keep out of reach of children.
2. If product contacts eyes, rinse immediately with plenty of water; seek medical attention if irritation persists.
3. If swallowed, do not induce vomiting; get prompt medical help.
4. For small spills, wipe up with an absorbent cloth; for large spills, contain and absorb with sand or inert material.
5. Keep container tightly closed when not in use; store in a frost-protected, indoor area.
Packaging & Storage
25 kg net per plastic drum. Store in a cool, shaded, well-ventilated area away from direct sunlight and sources of heat.
Shelf Life
3 years in unopened, original packaging when stored under recommended conditions.
Friendly Reminder: Treat wash wastewater prior to discharge; ensure compliance with local effluent standards.
Aluminum Surface Cleaner
Formulated with imported anionic and non-ionic surfactants and state-of-the-art green-chemistry technology, this water-based, mildly alkaline cleaning liquid is engineered specifically for low-silicon aluminum components. It delivers high-efficiency, energy-saving performance while remaining environmentally responsible, and serves as a direct replacement for trichloroethylene, hydrocarbon, modified-alcohol solvent cleaners, and aggressive acid/alkali systems.
Product SKU: 156
Product Brand: DAG
5
