500 Abarth L4 1.4L 2012-2015 RADIATOR PLASTIC TANK

Product Introduction

500 Abarth L4 1.4L 2012-2015 RADIATOR PLASTIC TANK

Cooling System Components > Radiator Components > Plastic Tank.

During vehicle operation, engine temperature rises rapidly, at which point the cooling system plays a crucial role. The radiator water chamber, as a vital channel for coolant circulation, directly impacts heat dissipation efficiency. It connects the engine and radiator, ensuring smooth coolant flow and preventing localized overheating that could damage the engine. The water chamber’s sealing and structural stability are especially critical in hot weather or during prolonged high-load driving. Leaks, deformation, or aging connections can lead to anything from reduced power to overheating and even damage to core engine components.

Core Product Information

1. OEM: 55111352AA

2. DPI: 13245

3. Vehicle Application: 500 Abarth L4 1.4L 2012-2015

4. Component Type: Upper/Lower Radiator Plastic Tank (Side Tank)

5. Material: PA66-GF30 (Polyamide 66 with 30% Glass Fiber)

Product Advantages

OEM-Grade Exact Fitment

1. Engineered to OEM specifications for direct replacement

2. 100% bolt-on installation with no modifications required

3. Precise molding ensures perfect seal with aluminum radiator core

Premium Material Engineering

1. PA66-GF30 Reinforced Plastic: Superior resistance to heat cycling (-40°C to 130°C)

2. Anti-aging Formula: Prevents common cracking and deterioration issues

3. Leak-proof Design: Manufactured with original-grade EPDM rubber gaskets

4. Chemical Resistance: Withstands corrosion from coolant additives and oxidation

Cost-Effective Solution

1. Replace only the failed plastic tank instead of the complete radiator assembly

2. Save 60-70% compared to dealership complete radiator replacement

3. Reduces labor time by 50% (30-45 minute installation)

Common Failure Symptoms & Solutions

500 Abarth L4 1.4L 2012-2015 RADIATOR PLASTIC TANK

1. Coolant Leakage: Plastic tank cracks at seams or mounting points – Replace with reinforced PA66-GF30 tank

2. Overheating: Pressure loss from tank failure – Restore system integrity with new tank

3. Visible Cracks: Age-related plastic degradation – Upgrade to anti-aging formula material

4. Seepage at Seals: Worn gasket interface – New tank includes fresh EPDM sealing surface

Technical Specifications

1. Operating Pressure: 16 PSI (Normal) / 26 PSI (Test Pressure)

2. Burst Pressure: >35 PSI

3. Temperature Range: -40°C to +130°C continuous

4. Material Grade: PA66-GF30 (30% Glass Fiber Reinforced Nylon)

5. Color: Black (OEM Standard)

6. Gasket Included: Yes (Pre-installed EPDM rubber seal)

Installation Requirements

500 Abarth L4 1.4L 2012-2015 RADIATOR PLASTIC TANK

1. Drain Coolant: Completely drain cooling system

2. Remove Old Tank: Disconnect hoses, unscrew mounting bolts (Torque: 8-10 N·m)

3. Clean Core Surface: Remove old sealant residue from radiator core

4. Install New Tank: Position tank, tighten bolts in cross-pattern

5. Refill & Bleed: Use Abarth coolant, bleed air from system

6. Pressure Test: Verify no leaks at operating temperature

⚠️ Important: Always replace both upper and lower tanks simultaneously to prevent mismatched aging and ensure balanced pressure distribution.