Product Name:
Low-Foam Aluminum Spray Cleaner
Scope of Use:
Removes mineral, vegetable, animal and cutting oils from aluminum alloy parts in automotive, aerospace, construction, textile and mining-machinery sectors.
Equipment:
High-pressure spray-wash cabinets, conveyor or rotary jet systems.
Operating Instructions:
Dilute to 3–5 % v/v with water; heat to 65 ± 5 °C; spray 30–120 s at 1.5–3 bar; rinse and dry.
Product Parameters
| NO | Item | Specifications | |
| 1 | Appearance | Colourless, odourless, transparent liquid | |
| 2 | Mixture Ratio | About 5% | |
| 3 | pH | Ratio | PH |
| 25% original solution | 12.76 | ||
| 4 | Corrosiveness | Level 0 | |
| 5 | Foaming (≤200) | 130 | |
| 6 | Solid Content | ≥40% | |
| 7 | Density (g/ml) | 1.02 | |
| 8 | Degreasing Time (min) | About 5 minutes | |
| 9 | Degreasing Temperature (°C) | 65±5 | |
| 10 | Surface Tension (mN/m) | 31.8 | |
| 11 | Refractive Index | Ratio | Concentration |
| 25% original solution | -- | ||
| 12 | Detergent Power (≥90) | 120 | |
| 13 | Physical Stability | Stable | |
Performance Advantages-Low-Foam Aluminum Spray Cleaner
1. Built-in anti-mold additive – inhibits fungal growth during storage and transit.
2. Fast oil break-up & rinse-free finish – removes mineral, vegetable, animal and cutting oils in a single pass.
3. Ultra-low foam < 1 cm at 65 °C – zero foam residue, eliminating entrapped bubbles that can cause spot-oxidation.
4. High-dilution economy – 3–5 % concentration cuts chemical spend by up to 50 % versus standard alkaline cleaners.
5. Zero etch, zero water marks – preserves original reflectivity; leaves uniform, spot-free matte surface ready for brazing or coating.
6. Eco-safe profile – non-toxic, non-sensitizing, readily biodegradable (> 90 % OECD 301); simplifies wastewater discharge compliance.
Solving Key Industrial Cleaning Problems
1. Eliminates post-wash pitting – neutral pH and zero free alkali protect aluminum from localized corrosion.
2. Stops foam overflow – <1 cm foam at 65 °C prevents pump cavitation and sensor blockage.
3. Removes oil from dead zones – low surface-tension surfactants penetrate micro-channels, louvers and blind holes.
4. Avoids equipment clogging – fully water-soluble, non-scaling formula keeps nozzles and filters clear, cutting downtime by 30 %.
Safety & Handling-Low-Foam Aluminum Spray Cleaner
1. Keep out of reach of children.
2. If contact with eyes, flush immediately with plenty of water for ≥15 minutes; seek medical advice if irritation persists.
3. If swallowed, do NOT induce vomiting; rinse mouth and get prompt medical attention.
4. Small spills: wipe up with absorbent cloth; large spills: contain with inert sand or vermiculite, place in sealed disposal container.
5. Reseal drum tightly after each use; store indoors above 5 °C (41 °F) and protect from frost to maintain performance.
Packaging & Storage
25 kg net in HDPE tight-head drum. Store sealed in a cool, dry, well-ventilated area away from direct sunlight and frost.
Shelf Life
36 months from manufacture date in original, unopened container.
Kind Reminder: Route spent wash water through your on-site WWTP or licensed treatment contractor until COD, oil and metal levels comply with local discharge limits before release.
Low-Foam Aluminum Spray Cleaner
Low-Foam Aluminum Spray Cleaner-Formulated with imported anionic and non-ionic surfactants blended under an advanced European cleaning matrix, this high-efficiency, energy-saving, water-based weak-alkaline fluid is engineered for low-silicon aluminum alloys (Si ≤ 3 %). It delivers solvent-grade performance while replacing trichloroethylene, hydrocarbon, modified alcohol and aggressive acid/alkali systems—zero VOC, non-flammable and readily biodegradable. Factory price, Bulk Order Discount—Instant Savings, FOB/CIF/DDP worldwide. Inquiry today for an instant quotation.
Product SKU: 106
Product Brand: DAG
5
