Product Name： Air Conditioner Parts Cleaner
Scope of Use：
Specially engineered to remove cutting fluids, way oils, release agents and other process soils from die-cast aluminum and aluminum-machined parts used in HVAC assemblies.
Recommended Equipment ：
Ultrasonic baths, heated spray washers, immersion or turbo-circulation systems.
Operating Instructions：
Dilute to 2 % v/v with DI or tap water; heat to 50 ± 5 °C; clean 3 – 10 min. Rinse and dry immediately for stain-free, corrosion-free results.
Product Parameters
| NO | Item | Specifications | |
| 1 | Appearance | Colourless, odourless, transparent liquid | |
| 2 | Density (g/ml) | 1.06 | |
| 3 | pH | Ratio | PH |
| 25% original solution | 12.71 | ||
| 4 | Active Matter Content | ≥42% | |
| 5 | Corrosiveness | Level 0 | |
| 6 | Foaming (≤200) | 90 | |
| 7 | Solid Content | ≥40% | |
| 8 | Cleaning Temperature (°C) | Around 50°C | |
| 9 | Cleaning Time (min) | About 5 minutes | |
| 10 | Refractive Index | Ratio | Concentration |
| 25% original solution | -- | ||
| 11 | Physical Stability | Stable | |
Air Conditioner Parts Cleaner Advantages
1. Non-toxic, non-hazardous, VOC-free formula – safe for operators and the environment.
2. Rapid oil displacement; rinses clean in 10 s, leaves zero film or soil redeposition.
3. Zero oxidation, zero etch; preserves original die-cast brightness and dimensional tolerances.
4. Water-break-free finish– no water spots, streaks or rainbow stains after drying.
5. Full penetration of complex geometries – eliminates oil traps in micro-channels, fins and blind holes that conventional solvents miss.
Solving Critical Industrial Cleaning Challenges
1. 360° Penetration Technology – dissolves oil from dead-end channels, micro-pores and under-cut features that spray or manual wiping never reach.
2. One-Fluid Versatility – replaces multiple SKUs; safely cleans die-cast aluminum, steel, copper, brass, plastics and rubber seals in the same bath.
3. Built-in Flash-Corrosion Inhibitor – eliminates post-blast rust and mold bloom for 30+ days indoor storage, even in 85 % RH.
4. Color-Lock Additive – prevents yellowing, dark spotting and galvanic discoloration on high-zinc or high-silicon aluminum alloys.
5. High-Capacity, Low-Drag Chemistry – 2 % concentration handles 8 000+ parts per bath, cutting fluid consumption by 60 % and boosting throughput 3× versus legacy alkaline cleaners.
Air Conditioner Parts Cleaner Safety & Handling
Aluminum-Safe HVAC Component Cleaner
1. Keep out of reach of children.
2. If swallowed, do NOT induce vomiting; rinse mouth and seek immediate medical attention.
3. Small spills: wipe with an absorbent cloth; large spills: contain with inert sand or vermiculite, transfer to a closed container for disposal.
4. Reseal drum immediately after use; store above 5 °C (41 °F) to prevent phase separation and preserve inhibitor package.
Packaging & Storage
25 kg net in HDPE tight-head drum. Store sealed in a cool, dry, well-ventilated area away from direct sunlight and frost.
Shelf Life
36 months in original, unopened container stored at 5–35 °C and ≤75 % RH
Eco Tip: Route spent wash water through your on-site WWTP or approved treatment contractor until COD, oil & metal levels meet local discharge limits—keep compliance simple and protect downstream ecosystems.
Air Conditioner Parts Cleaner
This high-performance, water-based alkaline fluid is built on imported anionic and non-ionic surfactants blended with an advanced European cleaning matrix. The result is an energy-saving, VOC-free solution that rapidly lifts mineral, vegetable and animal oils plus soluble soaps from copper, aluminum and multi-metal alloys used in residential and automotive HVAC components throughout the production line. Factory price, MOQ 1 × 25 kg drum, FOB/CIF/DDP worldwide. OEM labeling and bulk tote available. Inquiry today for instant quotation and 48-hour dispatch.
Product SKU: 110
Product Brand: DAG
5
