Product Name: Stainless Steel Specialty Cleaner
Scope: Engineered for stainless steel and other alloy components.
Equipment: Ultrasonic or heated tank.
Directions: Dilute 3–5 % by volume in water; heat to 65 °C ± 5 °C and clean ultrasonically or with heated immersion.
Product Parameters
| NO | Parameters | Specifications |
| 1 | Appearance | Milky white liquid |
| 2 | pH | 11 |
| 3 | Cleaning Power (≥90) | 120 |
| 4 | Physical Stability | Stable |
| 5 | Density (g/ml) | 1.06 |
| 6 | Solid Content | ≥45% |
| 7 | Corrosiveness | Grade 0 |
Product Advantages
1. Built-in brightening and short-term corrosion protection.
2. Non-toxic, non-irritating, HSE-compliant and eco-safe.
3. Zero water marks, zero streaks, zero residue, zero discoloration.
4. Ultra-fast degreasing, long bath life, easy rinsing, low dilution (3–5 %)—cuts overall cleaning cost by up to 40 %.
Solving Factory Cleaning Challenges
1. Eliminates post-clean rust spots and pitting on stainless steel.
2. Removes oil from blind holes and complex geometries in a single pass.
3. Prevents dull, gray discoloration after cleaning—restores original brightness.
4. Dissolves and lifts even heavy preservative oil films completely, no manual re-wipe.
5. Boosts cleaning power and batch size while cutting chemical consumption up to 50 %, lowering total cost.
Precautions
1. Keep out of reach of children.
2. Rinse thoroughly after cleaning; residue may leave stains or spots.
3. Wipe small spills with cloth; contain large spills with dry sand or inert absorbent.
4. Seal tightly when not in use; store above 5 °C to avoid cold-induced separation.
5. If skin contact occurs, flush immediately with plenty of water; remove contaminated clothing and seek medical attention if irritation persists.
Packaging & Storage
25 kg net plastic drum. Store in a cool, shaded area.
Shelf Life
3 years when sealed and stored properly.
Kind Reminder: Treat used cleaning effluent in an on-site wastewater system until it meets local discharge standards before release.
Stainless Steel Specialty Cleaner
Powered by imported anionic surfactants and state-of-the-art global chemistry, this water-based, VOC-free cleaner is engineered specifically for carbon and silicon steel components. It dissolves all industrial oils and greases in a single pass, replacing hazardous trichloroethylene, hydrocarbon, modified-alcohol solvents and aggressive acids/alkalis while meeting REACH, RoHS and OSHA standards.
Product SKU: 189
Product Brand: DAG
5
